The raw materials are mainly solid wood materials such as eucalyptus, and the manufacturing process mainly involves drying, sizing, directional paving, and hot pressing of flakes of a certain geometric shape (usually 50-80 mm long, 5-20 mm wide, and 0.45-0.6 mm thick). The formaldehyde emission of OSB is low and it is strong and durable.
The surface of the board substrate has undergone special treatment, adding a layer of PET film with a thickness of 0.35-0.6 mm. This Durable PET Door Panels for Kitchens has a delicate texture and soft luster, and is not prone to leaving fingerprints or oil stains.
It is an Versatile Particle Board for Shelving Solutions made of wood or wooden poles, crushed logs, with fine wood fibers on both sides and long wood fibers in the middle, which is glued under heat and pressure with adhesive. The panel finish is usually melamine finish, and its cross section presents a honeycomb shape.
Sustainable Multi-Layer Wood Composite Boards eucalyptus raw materials are assembled layer by layer using environmentally friendly glue, and the surface is covered with multi-layer plywood with melamine veneer, which has the characteristics of high cost performance and strong nail holding force.
Multi-layer solid wood eucalyptus raw materials are assembled layer by layer using environmentally friendly glue, and the surface is covered with multi-layer plywood with melamine veneer, which has the characteristics of high cost performance and strong nail holding force.
It is an artificial board made of wood or wooden poles, crushed logs, with fine wood fibers on both sides and long wood fibers in the middle, which is glued under heat and pressure with adhesive. The panel finish is usually melamine finish, and its cross section presents a honeycomb shape.
The surface of the board substrate has undergone special treatment, adding a layer of PET film with a thickness of 0.35-0.6mm. This board has a delicate texture and soft luster, and is not prone to leaving fingerprints or oil stains.
The raw materials are mainly solid wood materials such as eucalyptus, and the manufacturing process mainly involves drying, sizing, directional paving, and hot pressing of flakes of a certain geometric shape (usually 50-80 mm long, 5-20 mm wide, and 0.45-0.6 mm thick). The formaldehyde emission of OSB is low and it is strong and durable.