Compressed Wood Particle Board for Furniture
Compressed Wood Particle Board is a board made of wood particles compressed under high temperature and high pressure. Its production process mainly involves screening and drying wood processing residues, such as sawdust and branches, adding a certain amount of environmentally friendly adhesive, and then compressing it into shape through high temperature and high pressure equipment. It has a uniform particle distribution and a relatively flat surface, neat edges, and presents a natural wood color.
Compressed Wood particle board Features:
High-density structure: Compressed Wood particle board uses a high-temperature and high-pressure compression process to closely arrange the wood particles inside the board to form a high-density structure. Its density can generally reach 700-800kg/m³, which is higher than the density of ordinary particleboard (600-700kg/m³). This high-density structure gives the board good bending resistance and impact resistance, making it less likely to deform and damage when subjected to weight and external forces, and can better meet the needs of various usage scenarios.
Uniform particle distribution: During the production process, after fine screening and processing, the wood particles can be evenly distributed inside the board. This uniform particle distribution ensures that the mechanical properties of the board are relatively consistent in all directions, and there will be no local strength differences caused by uneven particle distribution. In practical applications, whether it is horizontal or vertical cutting, drilling and other processing operations, a stable processing effect can be obtained, which improves the utilization rate and processing efficiency of the board.
Good dimensional stability: Thanks to its high-density structure and special production process, Compressed Wood Particle Board has good dimensional stability under different environmental conditions. After professional testing, the change rate of length and width is controlled within 0.15% and the thickness change rate is only 0.2% in an environment with a temperature range of -20℃ to 60℃ and a humidity range of 30% to 80%. Therefore, in actual use, whether indoors or outdoors, the board can maintain a relatively stable size, and will not have obvious expansion, contraction, warping and other problems due to changes in temperature and humidity, ensuring the stability and service life of the overall structure.
Higher nail holding force: Due to the close combination of its internal wood particles and adhesives, as well as the special compression process, Compressed Wood Particle Board has a higher nail holding force. Compared with ordinary particleboards of the same specifications, its nail holding force can be increased by 20% - 30%. In furniture assembly and construction, when screws or nails are driven into the board, they can be firmly fixed inside the board, not easy to loosen or fall off, ensuring the stability of the connection. For example, when making wooden cabinets, cabinets made of Compressed Wood Particle Board have a more stable connection between the layers and side panels, which can withstand long-term use and frequent door opening and closing operations, improving the overall quality and service life of the furniture.
Excellent moisture-proof performance: Compressed Wood Particle Board uses a special moisture-proof treatment process during the production process, which makes it have a certain moisture-proof ability. After testing, after being placed continuously in an environment with a relative humidity of 90% for 48 hours, its water absorption thickness expansion rate is only about 10%, while the water absorption thickness expansion rate of ordinary particleboard is usually 15% - 20%. This excellent moisture-proof performance makes it more widely used in humid environments, such as decoration and furniture making in areas such as kitchens and bathrooms. It can effectively reduce the expansion, deformation, mildew and other problems of the board caused by moisture intrusion, extend the service life of the board, and reduce maintenance costs.
Excellent environmental performance: The adhesive used in the production of Compressed Wood Particle Board is an environmentally friendly adhesive, and its formaldehyde emission meets the E0 level requirements in the Chinese standard GB/T 39600-2021, that is, the formaldehyde emission is ≤ 0.05mg/m³. This shows that during use, it will not release a large amount of harmful substances such as formaldehyde, and has minimal impact on indoor air quality, providing users with a healthy and safe indoor environment. Compared with some traditional boards, its environmental performance is better, and it is particularly suitable for places with high requirements for indoor air quality, such as children's rooms, hospitals, and nursing homes.
Multiple thickness specifications: Compressed Wood Particle Board provides a variety of thickness specifications, the most common of which are 8mm, 18mm, etc. Boards of different thicknesses can meet the needs of different application scenarios. For example, 8mm thick boards are suitable for making some furniture parts with relatively low strength requirements, such as door panels, partitions, etc.; while 18mm thick boards can be used to make load-bearing structural parts, such as cabinet bottoms and desktops. Its diverse thickness specifications provide more choices for design and construction, and can better meet various personalized needs.
Passed multiple quality certifications: Compressed Wood Particle Board has obtained a number of authoritative certifications, including GB/T19001 - 2016/ISO9001:2015 quality management system certification, high-tech enterprise certification and China Environmental Labeling Certification. These certifications indicate that its production process follows strict international quality standards and environmental protection requirements. From raw material procurement, production process control to product inspection, each link has been strictly reviewed and supervised by professional organizations, ensuring the high quality and reliability of the product.
Compressed Wood Particle Board Application:
Interior decoration: In the field of interior decoration, Compressed Wood Particle Board can be used to make various furniture, such as wardrobes, cabinets, bookcases, etc. Its good processing performance and high strength enable it to meet the precision requirements of furniture making. For example, when making wardrobes, 8mm thick boards can be used to make door panels and partitions. Its surface flatness is high and it can work closely with the wardrobe frame to ensure the beauty and practicality of the wardrobe. At the same time, its environmental protection performance meets the indoor air quality standards and provides a healthy living environment for residents. In addition, it can also be used to make indoor partition walls, ceilings and other decoration parts. Its good dimensional stability and moisture resistance enable it to be used normally in humid bathrooms and kitchen areas, effectively improving the overall quality and durability of interior decoration.
Construction: In construction, Compressed Wood Particle Board 18mm thick boards are often used as building formwork materials. Its high strength and good dimensional stability can withstand the pressure and vibration during concrete pouring, ensuring that the formwork will not be deformed or damaged during repeated use. Compared with traditional wooden formwork, its service life can be extended by 2-3 times, reducing the frequency of formwork replacement and construction costs. At the same time, its moisture-proof performance enables it to maintain good performance in outdoor humid construction environments, reducing problems such as formwork expansion and decay caused by moisture intrusion, improving construction quality and efficiency, and providing a reliable formwork solution for construction projects.
Furniture Manufacturing: In the furniture manufacturing industry, Compressed Wood Particle Board is an ideal material for making office furniture. Large furniture such as office desks and conference tables usually require 18mm thick boards to make desktops and load-bearing structural components. Its high nail holding force and strength can ensure the stability of furniture during frequent use, and there will be no problems such as loose screws and sinking of the desktop. At the same time, its surface flatness is high, and it is easy to carry out subsequent treatments such as veneer and painting, which can meet the requirements of office furniture for beauty and practicality. In addition, its environmental protection performance meets the indoor environmental standards of office spaces, provides a healthy working environment for office personnel, and improves the market competitiveness and user satisfaction of office furniture.
Wooden Doors and Windows Production: Compressed Wood Particle Board can be used to make non-load-bearing parts of wooden doors and windows, such as door frames and window frames. Its good dimensional stability and moisture resistance enable it to maintain stable size and shape under different climatic conditions, and will not cause warping, cracking and other problems due to changes in temperature and humidity, ensuring the sealing performance and service life of doors and windows. In practical applications, after fine processing, the 8mm thick board can be closely matched with the main body of the door and window to form a beautiful decorative effect. At the same time, it has good processing performance and is easy to carry out carving, modeling and other process treatments. It can meet the design requirements of wooden doors and windows of different styles, providing a variety of choices for the wooden door and window market.
Clean workshop decoration: In the decoration of clean workshops in the electronics, medicine, food and other industries, the environmental protection and moisture resistance of Compressed Wood Particle Board make it an ideal decoration material. Its low formaldehyde emission meets the strict requirements of clean workshops for indoor air quality and will not pollute the production environment of high-precision electronic products, medicines and foods. In the decoration of the walls, ceilings and floors of clean workshops, 18mm thick boards can provide good support and protection. At the same time, their high surface flatness makes them easy to clean and maintain, which helps to maintain the cleanliness of the workshop. In addition, their moisture-proof properties enable them to maintain good performance even in a workshop with high humidity, reduce the problems of mildew and bacteria growth caused by moisture in the materials, provide reliable guarantee for the normal production and operation of the clean workshop, and improve product quality and production efficiency.
Ship interior decoration: The interior space of a ship is relatively closed, and the environmental protection and moisture-proof properties of the decoration materials are extremely high. Compressed Wood Particle Board has low formaldehyde emission and good moisture-proof properties, which can provide a healthy and comfortable living and working environment for crew members and passengers. In the decoration of ship cabins, corridors, toilets and other areas, 18mm thick boards can be used to make wall, ceiling and furniture components. Their good dimensional stability and strength prevent them from deformation and damage due to moisture intrusion when the ship is in a humid marine environment for a long time, and their service life is 3-4 times longer than that of ordinary decoration materials. At the same time, it has good processing performance and is easy to cut, splice and install. It can adapt to the complex decoration structure inside the ship, providing high-quality material selection for ship interior decoration and ensuring the normal navigation of the ship and the safety of personnel.
Compressed Wood Particle Board Maintenance:
Daily cleaning: Regularly wipe the surface of the Compressed Wood Particle Board with a soft, clean damp cloth to remove dust, stains and oil on the surface. Avoid using rough rags or cleaning tools containing granular substances to avoid scratching the surface of the board. During the cleaning process, you can use a neutral detergent, dilute it in a ratio of 1:20 between detergent and water, dip an appropriate amount of solution to wipe the surface of the board, then wipe off the residual detergent with a clean damp cloth, and then wipe it dry with a dry cloth. It is recommended to clean 1-2 times a week, and the specific frequency can be adjusted appropriately according to the degree of dirtiness in the use environment. Regular cleaning can maintain the beauty and cleanliness of the board and extend its service life.
Avoid contact with chemicals: During use, try to avoid direct contact between the Compressed Wood Particle Board and various chemicals, such as strong acids, strong alkalis, paint thinners, furniture cleaners, etc. These chemicals may corrode, discolor or damage the surface of the board. If accidentally exposed to chemicals, rinse the contact area with plenty of water immediately and check whether the board has any abnormal changes in time. For example, in the interior decoration of ships, when cleaning or repairing furniture or decorative parts made of boards, care should be taken to prevent the chemical components in the cleaning agents and repair materials from splashing onto the board surface. If accidentally splashed, immediately handle it according to the above method to minimize the risk of damage to the board.
Control the ambient temperature and humidity: In order to extend the service life of Compressed Wood Particle Board, the temperature and humidity of its use environment should be controlled within a suitable range. The ideal indoor temperature should be between 18℃ - 25℃, and the relative humidity should be maintained between 40% - 60%. An indoor thermometer and hygrometer can be used for monitoring. When the ambient humidity is too high, a dehumidifier can be used for dehumidification; when the humidity is too low, a humidifier can be used appropriately. For example, in the rainy season, the indoor humidity in the south often exceeds 70%. Turning on a dehumidifier can effectively prevent the board from being damp and deformed; while in the north, when heating in winter, the indoor humidity may be lower than 30%. Using a humidifier helps maintain the stability and performance of the board. By controlling the ambient temperature and humidity, the expansion, contraction, warping and other problems of the board caused by environmental changes can be reduced, ensuring the normal use of the board.
Regular waxing and maintenance: Regular waxing and maintenance of the surface of the Compressed Wood Particle Board can enhance its surface wear resistance and water resistance. It is generally recommended to wax the board every 3-6 months, and the specific frequency can be adjusted appropriately according to the frequency of use and degree of wear of the board. When waxing, first clean the board surface, wait for it to be completely dry, and evenly apply a thin layer of special wood wax oil. After the wood wax oil dries, use a clean soft cloth to polish it to make the surface of the board shiny and smooth. Wood wax oil can form a protective film on the surface of the board, reduce the wear of the board surface caused by friction in daily use, and also help prevent moisture from penetrating into the board, extending the service life of the board. For example, in the use of office furniture, the surface wear of the desktop part that often contacts the human body can be reduced by 30%-40% after regular waxing and maintenance, effectively improving the beauty and service life of the furniture.
Prevent heavy objects from hitting the surface or edge of Compressed Wood Particle Board in daily use. If heavy objects are placed on the surface of the board, soft pads should be used for isolation to avoid direct pressure on the board to cause indentations or local depressions. For example, when placing heavy objects such as computers and printers on a desktop made of board, a cork pad or felt pad at the bottom of the object can effectively disperse the weight and reduce the pressure on the board. The edge of the board should be avoided from being hit by sharp objects. When moving furniture and other items, be careful to avoid hitting the edge of the board. If a collision occurs, check the board for damage in time and take appropriate repair measures. By preventing heavy objects from hitting, damage to the surface and edges of the board can be reduced, and the integrity and beauty of the board can be maintained.
Regularly check the connection parts: For furniture or structural parts made of Compressed Wood Particle Board, the firmness of the connection parts should be checked regularly. The inspection cycle can be determined according to the frequency of use and importance. It is generally recommended to check once every 3-6 months. For example, for the connection between the wardrobe shelf and the side panel, the connection between the legs and the desktop of the office desk, etc., use a screwdriver or other tools to gently tighten the screws or check whether the connection parts are loose. If looseness is found, it should be tightened in time to prevent the overall instability of the structure due to loose connection parts, which will cause greater damage. During the inspection process, you can also observe whether the board at the connection part has abnormal phenomena such as cracking and deformation. If necessary, repair or replace parts in time to ensure the safe use of furniture or structural parts.